+64 9 634 3376 sales@jackson.co.nz

QikFIT Data / AV and Leads

QikFIT modules are compatible with OE Elsafe power rails, table boxes, floor and ceiling boxes

QikFIT modules simply click into the OE PRODIGY cable basket for fast installation.

Data panels available to fit industry standard cutouts.

OE Elsafe offer a wide range of QikFIT Data and AV cutouts and couplers designed to fit OE Elsafe power rails, table boxes, floor and ceiling boxes. All QikFIT modules simply click into the OE PRODIGY cable basket for fast installation. QikFIT can also be fitted directly into screens up to 3mm thick or when using a Thick Panel Frame can be installed into panels from 3mm to 14mm thick.

Once installed, QF5 tiles can be removed from the front to allow for easy replacement when reconfiguring or to allow access to the back of the tile for termination.

Data / AV tiles can be supplied with fully tested pre-terminated cables or alternatively the tiles can be provided with cutouts to accommodate all brands of data jacks including Clipsal style (referred to as AUNZ data jacks) and Keystone style data jacks.

OE Elsafe also offer QikFIT Data panels designed to fit industry standard cutouts. These panels are available pre moulded to accept 4 AUNZ data jacks without the need for an adaptor bezel or alternatively panels are available with two angle data bezels to allow for shallow cavity situations preventing tight bend radii.

Blank tiles are also available to fit any cutout size or alternatively can be used for blanking purposes. Please contact our friendly OE Elsafe team for any other data requirements.

QikFIT Power

1GPO | 2 GPO | 4 GPO
Soft / Hard Wired

QikFIT 2GPO TUF

2 GPOs + TUF Charging
USB Type-A and Type-C

QikFIT TUF

Twin USB Fast Charging
USB Type-A and Type-C

QikFIT TPF

Thick Panel Frame
Panel Mounted Power

QF Tiles

Available in white, black and grey

QF5 AUNZ Data Clipsal cutout OE Elsafe QF5 AUNZ 4 x Data Clipsal cutout OE Elsafe
QF5 AUNZ Data Cutout QF25 AUNZ Data Cutout
QF5 2 x Angled AUNZ Data Clipsal cutout OE Elsafe QF5 Keystone Data cutout OE Elsafe
QF25 2 x Angled AUNZ Data QF5 Keystone Cutout
QF5 blank OE Elsafe QF25 blank OE Elsafe
QF5 Blank QF25 Blank

Keystone Adaptors

OE Elsafe can provide Keystone style adaptors in eight different colours to work in conjunction with the Keystone Data tiles. These colour coded data outlet markers allow for easy data cable identification as well as allowing for the face of the data jack to sit flush in the keystone cutout creating a stylish finish.

Keystone adaptors OE Elsafe

QF Tiles

Available in white, black and grey. Other types of Audio Visual couplers and cutout are available on request.

HDMI

QF5 – HDMI Coupler
QF5 – HDMI Cutout
QF5 – HDMI Coupler with 1.8m Lead
QF5 – HDMI Coupler with 3.0m Lead

USB (Data Transfer)

QF5 – USB Coupler
QF5 – USB Cutout
QF5 – USB Coupler with 1.8m Lead
QF5 – USB Coupler with 3.0m Lead

VGA

QF5 – VGA Coupler
QF5 – VGA Cutout
QF5 – VGA Coupler with 3.0m Lead
QF5 – VGA Coupler with 5.0m Lead

Audio

QF5 – Audio Coupler
QF5 – Audio Cutout
QF5 – Audio Coupler with 3.0m Lead
QF5 – Audio Coupler with 5.0m Lead

RCA x 1

QF5 – RCA Coupler
QF5 – RCA Cutout
QF5 – RCA Coupler with 3.0m Lead
QF5 – RCA Coupler with 5.0m Lead

RCA x 2

QF5 – RCA Coupler
QF5 – RCA Cutout
QF5 – RCA Coupler with 3.0m Lead
QF5 – RCA Coupler with 5.0m Lead

RCA x 3

QF5 – RCA Coupler
QF5 – RCA Cutout
QF5 – RCA Coupler with 3.0m Lead
QF5 – RCA Coupler with 5.0m Lead

Keystone Adaptors

OE Elsafe can provide Keystone style adaptors in eight different colours to work in conjunction with the Keystone Audio Visual couplers. These colour coded outlet markers allow for easy data cable identification as well as allowing for the face of the data jack to sit flush in the keystone cutout creating a stylish finish.

Keystone adaptors OE Elsafe

Soft Wired Data

Qikfit soft wired data Cat 6 OE Elsafe

The open plan office is now the norm for the modern work environment all over the world. Workstations, hot-desking, conferencing and break out areas are all competing for the same space and the ability for the furniture and cabling infrastructure to adapt, to the changing needs of a business, quickly and at low cost is now paramount and the need for soft wiring has never been greater.

Data network cabling is not immune to this evolution, and, whilst transmission speeds are increasing (from CAT5e to CAT6, CAT6A and even CAT7), the ISO/IEC has set standards to ensure that network cabling manufacturers allow for a flexible architecture (see example and schematic below).

Soft wired data OE Elsafe
For an adaptable workspace, the most important part of the architecture is the Consolidation Point (CP) which provides a plug-and-play connection between the two sections of the Permanent Link.

At OE Elsafe we have a wide range of power and data solutions that suit both floor-fed and ceiling-fed applications. Our workstation, desk or table mounted accessories enable power and data points to be presented to the user in a single, easy to use and visually appealing package – the Terminal Outlet (TO).

The connection between CP and TO has specific requirements and Elsafe is able to draw on 20 years of market leading experience in soft wired data from its parent company, OE Electrics (UK), providing an unrivalled family of products to suit any application, each of which has been primarily engineered around the electro-mechanical characteristics of the data cabling. So strong is the desire to accommodate data in compliance with the standards, we have even developed adaptors where data manufacturers have no suitable alternative.

Options of factory installed data, whether generic (provided with OE Elsafe warranty) or branded (where ‘Channel’ warranties are expected) can simplify installation and reduce costs whilst at the same time improving quality through 100% end of line testing.

The key advantage of ending the Permanent Link with soft wiring is that it provides a modular, reconfigurable solution for work area changes – CHURN. As the Horizontal Cable does not need to be re-run, the office layout can be altered cost effectively and with minimal down time, allowing business operations to continue virtually uninterrupted.

Desk Solutions

OE Elsafe desk solutions were all designed around the data cabling, taking into account branded socket depths and large bend radii requirements.

In-Desk Solutions

Our In-Desk solutions also ensure that data outlets are easily accessible to the user.

Thick Panel Frame

Thick Panel Frame datasheet – click to download

The Qikfit Thick Panel Frame has been designed to accommodate the Elsafe Qikfit Series in a screen or other surface from 3mm to 14mm thick. The sleek and easy to install frame comes in white, black or grey in a QF45 size only. This is a brilliant cost effective mounting method that can be installed in a range of different configurations.

 

Technical

The Thick Panel Frame comprises of three parts: the Frame which is made from Polycarbonate and two frame clips which are made from a Nylon 6/6 to allow
the clip to spring as required. The clips are able to be adjusted for height variations in panels 3 – 10mm and panels 6 – 14mm thick.

 

Cutout

Mounting of QikFIT Thick Panel Frame:

The QikFIT panel comes with three moulded posts for stability. For installation of data (up to 9 x QF5 tiles), do not remove the posts. For Power, data and AV mixed configurations, remove posts as per the guide below.

 

For all data / AV (up to 9), leave all posts.                                   For 2GPO plus data / AV, remove 1 (left) posts.

 

For 2GPOTUF in central mount, remove all posts.                      For 4GPO, remove all posts

 

Cutout Dimensions

 
Qikfit data cutout dimensions OE Elsafe