QikFIT 2GPO TUF
Soft wired or hard wired.
TUF A+C USB fast charger inside.
Fits OE Elsafe rails & in-desk boxes.
QikFIT 2GPO TUF combines 2 GPOs and a TUF A+C (Twin USB Fast) charger in one compact module.
Delivering 25W of power across two USB ports, TUF A+C will simultaneously charge two devices at speeds comparable to or faster than the device’s own chargers, utilising IDR (Intelligent Device recognition) ensuring optimum charging rates.
The OE Elsafe’s QikFIT power series is designed to fit our range of power rails, table boxes, floor and ceiling boxes as well as industry standard cutouts. All sockets are auto switched for a clean sleek look and efficient operation.
The QikFIT series comes with either soft wired installation couplers, for quick and easy change and CHURN to suit any office environment or a hard wired
option which incorporates a cable with the OE Elsafe J-Coupler on the end.
Soft / Hard Wired
USB Type-A and Type-C
QikFIT Data / AV
Soft Wired Data / AV
Panel Mounted Power
- Technical Info
- TUF - USB Charger Specs
- Charging Times
- Thick Panel Frame
- Compatible Products
|1 x East & 1 x West facing Australian GPOs
1 x Type A USB and 1 x Type C USB charging socket
Male Wieland GST input and Female Wieland GST output
|Fascia – V0 Polycarbonate
Back – V0 Polycarbonate
|Fascia – Black, white, and grey|
Power Connection Options
|Male GST input and female GST output for cascading
800mm lead to J Coupler
1400mm lead to J Coupler
|Panel mount clips for surfaces 1mm to 3mm thick. When used in conjunction with the QikFIT Thick Panel Frame the QikFIT series can be mounted into panels from 3mm to 14mm thick.|
Quality and Testing
|Visual: Configuration and appearance.
Power sockets: Continuity, polarity, insulation and earth
USB charger: Output voltage and resistance
All sockets continuity tested with batch performance testing
“We test every pin on every connection in every socket”
TUF – Twin USB Fast Charger Specifications
QikFIT TUF is for charging only; no data transfer is available as no connection to a computer is provided.
|USB charging outlets||1 x Type A Female
1 x Type C Female
|Charging Current||Max 5A in total|
|AC voltage range||240V AC 50/60Hz|
|AC input current||Max 0.6amp at full load
<0.5mA at no load
|Rated total Output||25W max|
|Output voltage||5V DC +- 5%|
|Standby Power use||<0.05W|
|Life expectancy||Min 5 years in normal use|
|USB connector||Gold Plated
Min. Insertions – 5,000 for Type A, 10,000 for Type C
|Over current protection||Yes – Auto reset|
|Short Circuit protection||Yes – Auto reset|
|Operating Temperature||0° to 30°C|
|Max relative humidity||85% RH|
|Safety Certifications||Safety – IEC61558-2-16:2009, AMD1:2013
EMC – EN62104-3:200
|Additional Features||• Dynamic voltage adjustment to compensate for cable voltage loss
• Protection from external surges
• Blue LED
*Insertion lifetime refers to USB contacts only.
Indicative Charging Times
From 10% to 90%
|iPhone X||Type C – 79 minutes
Type A – 86 minutes
|iPhone 8+||Type C – 71 minutes
Type A – 75 minutes
|Samsung Galaxy Note 8||Type C – 69 minutes
Type A – 87 minutes
|iPad Pro 9.7||Type C – 125 minutes
Type A – 235 minutes
|Macbook Pro 13″ Laptop||Type C – 235 minutes|
Thick Panel Frame
The QikFIT Thick Panel Frame has been designed to accommodate the Elsafe QikFIT Series in a screen or other surface from 3mm to 14mm thick. The sleek and easy to install frame comes in white, black or grey in a QF45 size only. This is a brilliant cost effective mounting method that can be installed in a range of different configurations.
The Thick Panel Frame comprises of three parts
– Frame which is made from Polycarbonate
– Two frame clips which are made from a Nylon 6/6 to allow the clip to spring as required. The clips are able to be adjusted for height variations in panels 3 – 10mm and panels 6 – 14mm thick.
Mounting of QF items in Thick Panel Frames
The QikFIT panel comes with three moulded posts for stability. For installation of data (up to 9 x QF5 tiles), do not remove the posts. For Power, data and AV mixed configurations, remove posts as per the guide below.
For all data / AV (up to 9), leave all posts. For 2GPO plus data / AV, remove 1 (left) posts.
For 2GPOTUF in central mount, remove all posts. For 4GPO, remove all posts